Not every fire protection project requires the same fire hose configuration. Differences in water pressure, installation conditions, hose diameter and connection equipment can affect the final product selection.
For distributors, contractors and industrial procurement teams, providing the correct technical requirements before ordering helps avoid specification mismatches and unnecessary changes during production.
If you are sourcing custom fire hose products from China, here are seven important specifications to discuss with your supplier.
1. Hose Diameter and Water Flow Requirements
Diameter is one of the first specifications to confirm.
Common fire hose configurations include 1-inch, 1.5-inch, 2-inch, 2.5-inch, 3-inch, 4-inch and 6-inch sizes. Special large-diameter hoses are also available in certain product configurations.
The correct diameter should be selected according to:
- Required water flow
- Pump outlet dimensions
- Hydrant or water supply connections
- Hose route and installation space
- Intended firefighting application
Do not select a hose diameter based only on its appearance. It should match the hydraulic and connection requirements of the system.
2. Select the Appropriate Inner Lining
The inner lining affects the hose's flexibility, water compatibility and service characteristics.
Depending on the product series, available lining options may include:
| Lining Material | Selection Considerations |
|---|---|
| Natural Rubber | Flexibility and conventional water delivery applications |
| PVC | Material and cost requirements for general applications |
| TPU | Flexibility and abrasion-related service requirements |
| PU | Product-specific performance and application requirements |
The final material should be selected according to the actual operating environment and technical specification.
3. Confirm Working Pressure
Working pressure is a critical parameter when purchasing a fire hose.
Buyers should provide the system's operating pressure and confirm the required pressure class with the supplier.
Three pressure values should be clearly distinguished:
Working pressure: The intended operating pressure.
Test pressure: The pressure used during specified inspection or testing.
Burst pressure: The pressure at which the hose fails under a defined test condition.
These values are not interchangeable. The supplier should provide the relevant pressure information for the selected diameter and construction.
4. Choose the Right Outer Jacket Construction
The outer jacket provides reinforcement and contributes to the hose's structural performance.
Available constructions may include woven textile jackets, polyester high-tenacity yarn with twill weave, and double-jacket arrangements.
The choice depends on the required pressure rating, intended application and product design.
For buyers purchasing fire hoses in bulk, confirming the same jacket construction across repeat orders is also important for product consistency.
5. Determine the Finished Roll Length
Fire hoses are supplied in different roll lengths according to installation and transportation requirements.
For example, product configurations may support roll lengths ranging from 15 m to 100 m, depending on the model.
Before placing an order, confirm:
- Required length per roll
- Total number of rolls
- Whether different lengths are needed in one order
- Carton dimensions and packaging requirements
Standardizing roll lengths can make warehouse management and project distribution easier.
6. Specify Couplings and End Connections
Incorrect connections can cause installation delays even when the hose itself meets the required specifications.
Buyers should confirm:
- Coupling type
- Connection diameter
- Thread type or connection standard
- Material requirements
- Whether both hose ends require assembled couplings
If the hose needs to match existing firefighting equipment, providing a sample, drawing or clear connection photograph is recommended.
7. Confirm Color, Marking and Packaging
For distributors and project buyers, product appearance and identification are also important.
Before production, discuss:
- Hose color
- Printed product information
- Brand identification
- Roll labels
- Carton markings
- Export packaging requirements
These details should be documented in the final order specification to avoid differences between approved samples and delivered goods.
How to Prepare a Fire Hose Customization Enquiry
To help a supplier prepare an accurate quotation, buyers can provide the following information:
| Information | Details Required |
|---|---|
| Product Type | Single-jacket, double-jacket or other construction |
| Diameter | Required nominal diameter |
| Lining | Natural rubber, PVC, TPU or PU |
| Jacket | Polyester yarn and weave construction |
| Working Pressure | Required operating pressure |
| Roll Length | Length per roll |
| Coupling | Type, size and connection standard |
| Quantity | Total rolls or order volume |
| Destination | Country and delivery requirements |
If the project has special requirements, attach technical drawings, existing product samples or photographs.
